Extrication Tool Wraps / Bucket

Below are two different options for extrication tool wraps and a bucket option too.  This first one has been used for years.  Tools have been replaced, changed out, and others added to the mix from time to time.  There are three magnets that hold the wrap on the side of a car.

IMG_4952

This next wrap cost about $50 to put together.  Of course tool expense can vary depending on the brand you purchase.

goshen fd

Two magnets hold the wrap up.  The magnets have a 25 lbs strength.

IMG_4990

Another option is a relatively small bucket (found at Home Depot) with a rope (prusik cord) to hang on a vehicle mirror.  A 90 lbs magnet was screwed to the bottom of the bucket so it could be sat on the vehicle as well.

IMG_4980

FIRST DUE TACKEL ON FACEBOOK

IMG_4982

IMG_4985

Everyone doesn’t have to load down their turnout gear with tools for vehicle extrication.  These simple wraps/bucket can be deployed by the officer or designated member of the crew at working extrications.